Tehniliste probleemide või küsimuste korral kirjuta:
Kursuse sisu ja korralduslike küsimustega pöörduge kursuse korraldajate poole.
FAQs
How to configure wireless router in Packet Tracer? ›
So, here is how you configure a Cisco router by using Cisco Packet Tracer.
- Step 1: Create a Lab in Packet Tracer. ...
- Step 2: Access Command Line Interface. ...
- Step 3: Enter the Privileged EXEC Mode. ...
- Step 4: Switch to Global Configuration Mode. ...
- Step 5: Change the router name. ...
- Step 6: Assign IP Addresses.
Mar 18, 2024
Click on the PC icon on the Packet Tracer Logical workspace and select the Desktop tab and then the IP Configuration icon. In the IP Configuration window, select the DCHP radio button as shown in the figure so that the PC will use DCHP to receive an IPv4 address from the Wireless router.
How do I connect my laptop to my computer using a router? ›Select the Network icon in the notification area, then select the > icon next to the Wi-Fi quick setting to see a list of available networks. Choose the network that you want to connect to, and then select Connect. Type the security key (often called the password). Follow additional instructions if there are any.
How do I connect my router to my computer? ›Plug one end of an Ethernet cable into your modem. Plug the other end of the Ethernet cable into the Internet, Uplink, WAN or WLAN port on your router. Plug in your router and allow at least 2 to 3 minutes for it to light up. Turn off your computer and connect an Ethernet cable to your computer.
How do I connect my laptop to my router? ›Here's how you connect your computer directly to your router: Step 1: Plug one end of an Ethernet cable into the Ethernet port on your computer. Step 2: Plug the opposite end of the Ethernet cable into one of the Ethernet ports on your router. These are often labeled “LAN” (local area network), or “LAN1,” “LAN2,” etc.