ECON 150: Microeconomics (2024)

Section 01: Elasticity -- Beyond Supply and Demand

Total Revenue

Why do move theaters often have empty seats? Would they generate more revenue by lowering the price and selling more tickets? How responsive are movie goers to a change in the price? The answer to these questions are found using elasticities.

A firm’s profit is determined by taking the total revenue minus the total cost. Total revenue is equal to the price each unit sells for times the quantity or number of units sold. We will focus on total revenue in this section and leave the discussion on costs for later.

ECON 150: Microeconomics (1)

One of the key decisions in business is determining what price to charge. We know from the law of demand, that as the price increases (decreases) the quantity demanded decreases (increases), but the question is by how much? Does total revenue increase or decease as we raise or lower the price? The answer is, as is often the case in economics, it all depends.

Let’s assume that the demand for a given product can be represented by the equation, price = 100 - .5(quantity). If the current price is 10 dollars and the quantity demanded is 180, then a two dollar increase in the price reduces the quantity demanded by four units. Even though four units less are sold, the additional two dollars per unit sold increases the total revenue.

ECON 150: Microeconomics (2)

If the price is $90, the quantity demanded is 20. Raising the price by two dollars decreases the quantity demanded by four units. In this case, the total revenue would decline when the price is increased.

ECON 150: Microeconomics (3)

Own Price Elasticity

Own price or demand elasticity measures the percentage change in quantity demanded divided by the percentage change in the price of the good. Due to the law of demand, the sign will always be negative, so it is common to consider only the absolute value when analyzing the own price elasticity.

Typically we compute the percentage change using the original value. For example, if the price increases from $2,000 to $2,200, then the percentage increase in the price is the change ($2,200 - $2,000) divided by the original amount ( $2,000) or a 10 percent increase.

However,when we compute the elasticity overa range, sayfrom A to B, we use the average quantity and average price in the denominators. The reason for this convention is that we want the elasticity to be the same over the range regardless of whether we move from A to B or from B to A and using the average in the denominator for percent changes will ensure this. Using the averages is known as the arc or mid-point elasticity formula.

ECON 150: Microeconomics (4)

Point elasticity is useful for relatively small changes in price or quantity, and is particularly beneficial when using calculus. However, when using the point elasticity equation, it makes a difference if you go from A to B or from B to A. Since this is a principles course, we will be using the arc elasticity equation instead of the point elasticity.

ECON 150: Microeconomics (5)

Elasticity

If something is elastic it is responsive, flexible, or readily changed. A rubber band is elastic and with little force it easily stretches. A chain on the other hand is rigid and changes very little when pulled. In the context of price elasticity of demand, the price change is comparable to the force applied to a rubber band or chain and the change in quantity demanded is comparable to the stretch. When consumers are relatively responsive to a price change, we say that demand is elastic. When the change in quantity demanded by consumers is relatively small in response to a price change, we say that demand is inelastic. When looking at the demand of goods or services, what are the factors that determine how much the quantity demanded changes as the price changes?

If the percentage change in quantity demanded is greater than the percentage change in price, the elasticity is greater than one and the good is classified as elastic, meaning the percentage change in quantity demanded is relatively responsive to the percentage change in price. An elasticity of demand less than one is classified as inelastic, meaning the percentage change in quantity demanded is relatively unresponsive to the percentage change in price.

ECON 150: Microeconomics (6)

Elasticity measures the percentage change in quantity demanded divided by the percentage change in price. At a relatively high price, the percentage change in price is relatively small while the percentage change in quantity demanded is relatively large. For example, at A, the percentage change in price (2/91) is two percent while the percentage change in quantity demanded (4/18) is 22 percent. Thus in region A of the demand curve, the demand is elastic.

At a relatively low price, the percentage change in price is relatively large while the percentage change in quantity demanded is relatively small. At B, the percentage change in price (2/11) is at 18 percent while the percentage change in quantity demanded (4/178) is two percent.

ECON 150: Microeconomics (7)

As you may have expected, there is an elastic, unit elastic, and inelastic portion along a linear demand curve. These regions correspond directly with how Total Revenue changes with changes in price.In theelastic region,the percentage change in quantity demanded is greater than the percentage change in price, so raising the price in this region of the demand curve will decrease total revenue while lowering the price increases total revenue.

On the other hand, in the inelastic region, a one percent change in the price results in a less than one percent change in the quantity demanded. A price increase will therefore increase total revenue while a price decrease will decrease total revenue.

Finally, when the percentage change in quantity demanded is equal to the percentage change in price, demand is said to be unit elastic. In this case, a price increase or decrease does not change total revenue.

ECON 150: Microeconomics (8)

Slope and Elasticity

We have seen thatelasticity changes along a linear demand curve. But it is also true that the slope of a demandcurve will have an impact on the elasticity of demandover the entirerange of a demand curve.When comparing demand curves for different products, it is common to compare them in terms of elasticities when prices change over the same range. That is, how responsive will the quantity of one product compare to that of another product when prices change the same amount?When making such comparisons, a steeper slopereflects a more inelastic demand while a flatter or more horizontal slope reflects a more elastic demand. Now we must be clear, theslope of a demand curve, in and of itself, does not reflect the elasticity - it will change along the curve and to know its actual value,we need to look at the percentage changes. However,we can be certain that for comparingdemand curves with different slopes,a steeper slopereflects a more inelastic demand while a flatter or more horizontal slope reflects a more elastic demand (using the same price range for both).

ECON 150: Microeconomics (9)

For an elastic good, a one percent change in the price results in a more than one percent change in quantity demanded. Since the percentage change in quantity demanded is greater than the percentage change in price, raising the price of an elastic good will decrease total revenue while lowering the price of an elastic good increases total revenue. In our example, a one percent decrease in price, results in a seven percent increase in the quantity demanded. Restaurant meals, foreign travel, and name brand products, such as a particular brand of a vehicle or shoes have elastic demands.

ECON 150: Microeconomics (10)

For an inelastic good, a one percent change in the price results in a less than one percent change in the quantity demanded. A price increase for an inelastic good will increase total revenue while a price decrease for an inelastic good decreases total revenue. Salt, toothpicks, matches, gasoline, and physician services are examples of goods or services that have an inelastic demand.

ECON 150: Microeconomics (11)

If a price increase or decrease does not change total revenue the good or service is said to be unit elastic. The percentage change in quantity demanded is equal to the percentage change in price.

ECON 150: Microeconomics (12)

Extreme Cases

Two extreme cases are perfectly inelastic and perfectly elastic goods. Although these cases are extremely rare, they provide some additional insight. If the quantity demanded doesn’t change at all when the price changes then the elasticity of demand is zero and the demand curve is vertical. When an individual is insulin dependent and consumes the same amount of insulin each day regardless of the price, her demand would be perfectly inelastic resulting in a vertical demand curve. A helpful hint is to remember that I is a tall letter so the demand curve would be vertical. Another example would be a drug addict that consumes the same amount of the drug regardless of the price. Perfectly inelastic demand has a elasticity of zero while inelastic demand is anything less than one.

The other extreme is a perfectly elastic demand curve which gives a horizontal demand curve. An potential example would be an individual grain farmer in a competitive market that can sell all that he can produce at the going market price. But if he tries to raise the price, the quantity demanded for the good goes to zero. A perfectly elastic demand has an elasticity that is infinite while elastic demand is anything greater than one.

ECON 150: Microeconomics (13)

Determinants of the Elasticity of Demand

Certain factors can explain why the elasticities differ when comparingdemand curves; these factors are called determinants of the elasticity of demand.

1. Available close substitutes

The greater the number of close substitutes that are available for a good, the more elastic it becomes. If there are many bread stores in the city and one bread store raises its price, the quantity demanded decreases since there are many other stores producing a similar product. On the other hand if an individual is on insulin or another particular type of medication for which few close substitutes exist, then an increase in the price results in very little change in the quantity demanded of the good.

2. Percent of Income

The percent of income spent on the good influences the elasticity of demand. Think of your annual expenditures on toothpicks or pencils. If the price of those items increased, by say 20 percent, the quantity demanded would likely decrease very little due to your annual expenditures on the item. Spending $.60 instead of $.50 each year on toothpicks doesn’t dramatically change the quantity demanded. However for those items that make up a greater portion of our income, we are more responsive. If the price of a car increases by 20 percent, the quantity demanded is likely to decline significantly. In general, the greater percent of income spent on the good the more elastic it becomes, all else held constant.

3. Luxury or necessity?

Those items that are a necessities in life are more inelastic than items that are a luxury. Food in general, salt, and life saving medical care are examples of necessities and have lower price elasicities than luxury items such as: jewelry, yachts, or vacation travel.

4. Time period

The longer the time period, the more elastic a good becomes as more substitutes become available. If the price of gas doubled, car owners would still need to buy gas. But in time, they may choose to trade their larger vehicle in for one that is more fuel efficient or uses an alternative fuel, or even choose to move to a different apartment so that they are closer to work or able to use an alternative methods of public transportation such as a subway, train or bus line. In the short run, the elasticity of gas is estimated to be .2 while in the long run is .7 (http://www.mackinac.org/1247).

5. Market definition

The last determinant of own price elasticity is the market definition. The broader the definition the fewer number of close available substitutes exist. If a single gas station in town raises its price, there are several other gas stations in town that sell a very similar product, thus the gas at a particular station tends to be elastic. However, if we look at the entire market for gas, there are few substitutes and the own price elasticity is inelastic.

Back to our original question, why do movie theaters typically have empty seats? Would they increase revenue by lowering the price? It turns out that in general movies elasticity of .9 (|Ed| = .9) ,which is close to unit elastic but on the inelastic side. Decreasing the price by ten percent would only increase the quantity demanded by nine percent leading to a drop in total revenue.

Practice

Now answer the following questions using the data on the table below. Try not to peek at the answers until after you've answered the questions on your own.

1. List the determinants of demand elasticity.

2. Compute the total revenue for each and determine if the good is elastic or inelastic.

Good A
Price $5 Quantity 15
Price $6 Quantity 10
Good B
Price $5 Quantity 50
Price $6 Quantity 48

3. Compute the elasticity of demand.

Q1= 4 Q2 = 5

P1= $3 P2 = $2.25

Answers

Good A

Price goes up, revenue goes down – elastic

Price $5 Quanitity 15 = 75
Price $6 Quantity 10 = 60
Good B

Price goes up, revenue goes up – inelastic

Price $5 Quantity 50 = $250
Price $6 Quantity 48 = $288

Elasticity of demand / Own Price Elasticity

Q1= 4 Q2 = 5

P1= $3 P2 = $2.25

.2222/-.2857143 = |-.77| < 1 Inelastic

A 1% increase in price leads to a .77% decrease in quantity demanded.

Section 02: Other Elasticities

Other Elasticity Measures

In addition to the own price or demand elasticity, there are other elasticity measures that provide additional insights. These include the elasticity of supply, cross-price elasticity and income elasticity.

The elasticity of supply is the same basic formula as the demand elasticity, but looks at the percentage change in quantity supplied instead of percentage change in quantity demanded. The measure looks at the responsiveness of producer to changes in the price of the good produced.

The law of supply states that as the price increases (decreases) the quantity supplied increases (decreases). Since the relationship between price and quantity supplied is positive or direct, we don’t need to take the absolute value. The elasticity of supply is compared to one and has a similar interpretation to that of the elasticity of demand.

ECON 150: Microeconomics (14)

The following list contains the main determinants of supply elasticity.

1. Product type

2. Time

3. Production capacity

4. Input substitution -- Flexibility and Mobility

The type of product impacts how quickly a producer is able to respond to a change in price. A manufacturing firm may be able to quickly adjust production levels with only minor adjustments in the equipment while other products such as apples require several years to establish a new orchard. Since child care services requires relatively few skills compared to the those of a physician, the supply elasticity of child care services is more elastic than that of physician services. To provide more physician care would require years of medical training. We will discuss later in the course a condition where the labor supply curve becomes backward bending. A physician making a very large income may actually choose to work fewer hours if they receive a higher income per hour.

Time is a key determinant of supply. In the case of apples and some other agriculture products, the immediate elasticity of supply is very inelastic, i.e., there are only so many apples available for sale today. However, with time producers are able to respond to the increase in price, manufacturing firms can build new facilities, farmers can plant additional acres to the particular crop. Thus in time, the elasticity of supply becomes more elastic.

If a firm is already operating at full capacity, then to increase supply would require building additional facilities and purchasing new equipments. A firm that is operating at below full capacity, can respond to a price increase quicker than a firm that is already at full capacity.

Another determinant in the elasticity of supply is input substitution. As the price of a good increases, how easily can inputs that were used in the production of another good be switched over to producing the good with the higher price?

ECON 150: Microeconomics (15)

Cross Price Elasticity

The cross price elasticity measures the percentage change in the quantity demanded for one good, say good x, given the percentage change in the price of another good, say good y. The elasticity is compared to zero.

If the price of good y increases and the quantity demanded for good x increases, the cross price elasticity would have a positive sign and the goods are considered substitutes. Raising the price of one soft drink causes consumers to consume more of the other soft drink since it is now relatively less expensive. A decrease in the price of beef causes a decrease in the quantity demanded of pork.

If the cross price elasticity of the two goods is negative, they are considered complements. Complements are consumed together so an increase in the price of digital music players, e.g., iPods, would lead to a decrease in the quantity demanded of online music downloads, e.g., iTunes.

When the quantity demanded doesn’t change as the price of the other good changes, the goods are considered to be unrelated and have a cross price elasticity of zero.

ECON 150: Microeconomics (16)

Practice

1. Compute the cross price elasticity and determine if the goods are substitutes or complements. Try not to look at the answers until after you have tried to figure it out on your own first.

Qx1 = 10 Qx2 = 11

Py1 = $1 Py2 = $1.05

2. If the cross-price elasticity of x and y is +0.5, then a 10 percent increase in the price of y will change the quantity demanded of x by ____.

Answers

1. The goods are substitutes.

Qx1 = 10 Qx2 = 11 ΔQ = 1

Py1 = $1 Py2 = $1.05 ΔP = .05

Exy = (1/10.5) / (.05/1.025)

Exy = .09523/ .04878

Exy = 1.95

2. The goods are complements.

Exy = -.5 = %ΔQx / 10

Solve the equation by multiplying both sides by 10.

%ΔQx = -.5* 10 = -5 or -5 percent

Income Elasticity

The last elasticity measure is income elasticity which measures the percentage change in quantity demanded given a percentage change in income. Goods and services with negative income elasticities are inferior goods and include items such as dry milk and second-hand clothing. As incomes rise people buy less of these goods.

Goods with positive income elasticities are normal goods and can be divided into two additional categories, those between 0 and 1 are necessities and those greater than one are luxury items. A one percent increase in income leads to more food, water, clothing, and housing but the quantity demanded increases by less than one percent. Quantity demanded of luxury items such as jewelry, leisure travel, elective surgery increase by more than one percent given a one percent increase in income. When incomes fall, the quantity demanded for these luxury items also falls by more than the percentage change in income.

ECON 150: Microeconomics (17)

Practice

1. Talise’s income increases from $25,000 to $30,000 per year and her demand for pizza increases from 12 to 14 per year. Compute her income elasticity. Try not to look at the answer until after you've tried to solve the problem on your own.

Answer

1. Pizza is a normal necessity for Talise.

(14-12) / (14+12)/ 2 / (30,000 – 25,000) / (30,000 + 25,000)/ 2 = .846

Using Elasticities

Understanding elasticities is critical when making pricing decisions in business. For example, Disneyland and Disneyworld offer a lower price for state residents. Since residents are closer and can go more often, their elasticity of demand is more elastic and total revenue for the company increases by decreasing the price. Nonresidents are less sensitive to price changes; vacationers that are required to travel a long ways will likely only go once during the year. Given that their demand is less elastic, the company makes greater profits by charging them a higher price.

If a company can divide their customers into different groups that have different elasticities, they are able to charge each group according their elasticity of demand. These groups may be by age, such as children rates or senior citizen discounts, or by geographical region, as shown in the example above.

Understanding cross price elasticities, businesses may reduce the price of a good below their actual cost. These loss leaders are priced to get the customers into the store and while purchasing that item, they also will purchase other items.

Government - Tax Incidence

Governments can also use elasticities when determining the tax incidence or what portion of a tax is ultimately borne by the consumers and the producers. Governments often tax addictive substances such as alcohol and cigarettes since demand is relatively inelastic. These “sin taxes” serve two purposes - since they contribute to poorer health and additional medical costs that are often paid for by all citizens, it would be appropriate to tax those individuals using the products. The second justification is that the demand for these products is inelastic thus imposing a tax significantly increases tax revenues.

Elasticities are used to determine how much of a tax is borne by the producer verses the consumer. For example, when a tax is imposed on cigarettes, producers are able to pass along most of the burden of the tax by raising the price.

ECON 150: Microeconomics (18)

If the supply is more elastic than demand, then the producer will bear a greater burden of the tax. Using the equations above, if the elasticity of demand is 3 and the elasticity of supply is 0.5, then the burden of the tax on the consumer is .5/(3+.5) = .143 and the burden on the producer is 3/(3+.5) = .857. Thus 14.3 percent of the burden of the tax will be the consumer while 85.7 percent is upon the producers.

ECON 150: Microeconomics (19)

Practice

Tax Burden on Consumer = Es/(Ed+Es)

Tax Burden on Supplier = Ed/(Ed+Es)

1. Compute the tax burden on the consumer and the supplier given the following:

–Ed = 1 and Es = 2

Try not to look at the answers until after you have tried to find the solution on your own.

Answer

Tax Burden on Consumer = 2/(1+2) = 2/3

Tax Burden on Supplier =1/(1+2) = 1/3

ECON 150: Microeconomics (2024)

FAQs

Is Econ 201 macro or micro? ›

This is an introductory course in economics with an emphasis on macroeconomics.

Is Econ 102 macro or micro? ›

More specifically, ECON 102 is an introduction to microeconomic analysis and policy. The principal objective of the course is to enable students to analyze major microeconomic issues clearly and critically.

Is Econ 101 a microeconomic? ›

This course is an introduction to the determination of price theory, distribution theory, and market structure analysis. The course also will examine current economic problems and international trade.

How do you calculate marginal resource cost? ›

The marginal resource cost is the additional cost incurred by employing one more unit of the input. It is calculated by the change in total cost divided by the change in the number of inputs.

Is micro econ hard? ›

As mentioned previously, AP Microeconomics course material was designed to mimic an introductory college-level course, so it will certainly be more difficult than a standard high school class. Students unfamiliar with economic topics — or how to work with data — may find it challenging.

Is Macro Econ hard? ›

AP Macroeconomics is considered quite easy, with class alumnae rating it 4.6/10 for overall difficulty (the 19th-most-difficult out of the 28 large AP classes surveyed).

Is micro econ math? ›

Microeconomics can be, but is not necessarily, math-intensive. Fundamental microeconomic assumptions about scarcity, human choice, rationality, ordinal preferences or exchange do not require any advanced mathematical skills.

What is micro econ class? ›

Microeconomics covers principles and theories such as how individuals decide what to buy and how businesses decide what to charge including why different products have different values. It also looks at the role of government such as public goods, welfare, utilities, taxes and more.

What is econ Micro? ›

Microeconomics studies the decisions of individuals and firms to allocate resources of production, exchange, and consumption. Microeconomics deals with prices and production in single markets and the interaction between different markets but leaves the study of economy-wide aggregates to macroeconomics.

Is microeconomics AP easy? ›

AP Microeconomics is considered quite easy, with class alumnae rating it 4.4/10 for overall difficulty (the 21st-most-difficult out of the 28 large AP classes surveyed). The pass rate is slightly lower than other AP classes, with 57% graduating with a 3 or higher.

Is micro econ easier than macro? ›

Which is easier, micro- or macroeconomics? Microeconomics is usually easier for people to understand since it accords with personal budgets and accounting. Macroeconomics gets into money supply issues and debt levels the understanding of which are hard for most people to grasp.

Is paper 1 economics micro or macro? ›

Paper 1 tests your know of microeconomics, Theme 1 and Theme 3, whilst Paper 2 tests macroeconomics, Theme 2 and Theme 4. Paper 3 has a Section A and Section B, both with data response questions with the same format. This is a synoptic paper and tests all four themes.

How do you calculate MR and MC? ›

Marginal revenue is the income gained by selling one additional unit, while marginal cost is the expense incurred for selling that one unit. Each measure the incremental change in dollars between varying levels of sales to determine at what level a company is most efficiently producing and selling goods.

How do you find Mr and MC in economics? ›

For instance, say the total cost of producing 100 units of a good is $200. The total cost of producing 101 units is $204. The average cost of producing 100 units is $2, or $200 ÷ 100. However, the marginal cost for producing unit 101 is $4, or ($204 - $200) ÷ (101-100).

Is economics math heavy? ›

If you are considering graduate school in Economics, you need to take even more math. Economics research makes heavy use of mathematics, and economics Ph. D. programs assume students enter the program with a strong mathematics background.

What grade do I need to pass microeconomics? ›

What is a good AP® Microeconomics score? Passing scores for Advanced Placement exams are scores of 3, 4, or 5.

Is Econ an easy degree? ›

The economics major is not an easy degree choice. It requires a great deal of critical thinking and analysis on the part of economics students. As you advance in your coursework, the subject matter covered in economics degrees become even more thought-provoking and challenging.

How do you pass macro economics? ›

AP Macroeconomics Exam Tips
  1. Take advantage of the 10-minute planning time. ...
  2. Remember that you may answer the questions in any order. ...
  3. Don't restate the question. ...
  4. Use correct terminology. ...
  5. Use graphs wisely. ...
  6. Label graphs clearly, correctly, and fully.

Can I self study for macroeconomics? ›

Lucky for you, AP Macro is one of the easier AP subjects to self-study. While teaching yourself an entire AP class won't be easy, it is entirely doable.

Why is economics so hard? ›

A college-level economics class can be challenging because you need to grasp new concepts like supply and demand, scarcity, diminishing returns, and opportunity costs. It requires you learn new vocabulary and to use critical thinking skills.

What are the 5 topics of microeconomics? ›

Common microeconomics topics are supply and demand, elasticity, opportunity cost, market equilibrium, forms of competition, and profit maximization.

What are the 3 main concepts of microeconomics? ›

The three main concepts of microeconomics are:
  • Elasticity of demand.
  • Marginal utility and demand.
  • Elasticity of supply.

How long is the micro econ exam? ›

The AP Microeconomics Exam assesses student understanding of the skills and learning objectives outlined in the course framework. The exam is 2 hours and 10 minutes long and includes 60 multiple-choice questions and 3 free-response questions.

Why do you study microeconomics? ›

This branch of economics helps us understand the level of satisfaction of the people in the economy. It also helps economists identify the allocation of resources within the economy.

What's the difference between macro and micro econ? ›

Microeconomics has applications in trade, industrial organization and market structure, labor economics, public finance, and welfare economics. Macroeconomics is the study of the decisions of countries and governments. The term analyzes entire industries and economics rather than individuals or specific companies.

Where can I study microeconomics? ›

48 results for "microeconomics"
  • Free. University of Illinois at Urbana-Champaign. ...
  • Free. University of Pennsylvania. ...
  • Free. University of Pennsylvania. ...
  • Sapienza University of Rome. Macroeconomic Financial Accounts. ...
  • Free. University of Amsterdam. ...
  • Free. Yale University. ...
  • Columbia University. ...
  • Erasmus University Rotterdam.

What does a micro economist do? ›

Microeconomists study the supply and demand decision of individuals and firms, such as how profits can be maximized and how much of a good or service consumers will demand at a certain price.

Which is the easiest AP class? ›

The 4 easiest AP exams to self-study are Psychology (3.4/10), Computer Science Principles (3.8 / 10), Microeconomics (3.9/10) and Environmental Science (3.9/10), as rated by over 2,900 real AP class alumnae reviewers who rated self-study difficulty from 1 (easiest to self-study) to 10 (hardest to self-study).

What is the most difficult AP test? ›

United States History, Biology, English Literature, Calculus BC, Physics C, and Chemistry are often named as the hardest AP classes and tests.

What is the easiest AP test? ›

Top 10 Easiest AP Classes by Exam Pass Rate
AP Class/Exam*Pass Rate (3+)Perfect Score (5)
1. Physics C: Mechanics84.3%41.6%
2. Calculus BC81.6%44.6%
3. Spanish Literature75.1%17.6%
4. Physics C: Electricity and Magnetism74.4%40.4%
6 more rows

Which AP exam is easier macro or micro? ›

AP Micro has a passing rate of 59.1% while AP Macro's is 51.3%. So AP Micro had a slightly higher passing rate than AP Macro, but this still isn't a huge difference. Additionally, AP Macroeconomics is quite a bit more popular to take than AP Microeconomics.

Is microeconomics harder than statistics? ›

micro is easier by far, and more useful i think. Although both classes will require you to spend time doing homework.

Which has more math micro or macro economics? ›

Don't get confused with this : Microeconomics is almost entirely math. One the other hand, Macroeconomics is almost entirely economics. Hence, to answer your question, microeconomics has more math than macroeconomics.

Is paper 2 Economics Macro? ›

This paper focuses on the macro economy as a general equilibrium system and discusses how goods, money and factor markets interact to determine national income and its components.

Is economics a level hard? ›

Although studying Economics can be a hugely rewarding and valuable subject, many students struggle with it at A-Level, particularly because of the tricky essay structure and the combination of skills it demands.

What should I study for economics paper 1 grade 12? ›

Grade 12 Economics

The following topics make up each of the TWO exam papers that you write for the Economics examination: Macro-economics: Circular flow, Business cycles, Public sector, Foreign exchange markets, Protectionism and Free Trade. Micro-economics: Perfect markets, Imperfect markets, Market failure.

How do you calculate MC curve? ›

Marginal cost (MC) is calculated by taking the change in total cost between two levels of output and dividing by the change in output. The marginal cost curve is upward-sloping. Average variable cost obtained when variable cost is divided by quantity of output.

What is the MC Mr Rule? ›

In economics, the profit maximization rule is represented as MC = MR, where MC stands for marginal costs, and MR stands for marginal revenue. Companies are best able to maximize their profits when marginal costs -- the change in costs caused by making a new item -- are equal to marginal revenues.

How is master formula calculated? ›

The master formula is for 100 g, the prescription is for 50 g, therefore the multiplying factor is 50/100, i.e. each quantity in the master formula is multiplied by 50/100 = 0.5 to give the scaled quantity.
...
Calculating quantities from a master formula.
IngredientMaster formulaScaled quantity
Waterto 10 mLto 200 mL
3 more rows
Jun 24, 2016

How MPC and MPS are calculated? ›

The marginal propensity to consume (MPC) is found by dividing the change in spending on consumption by the change in someone's income. The marginal propensity to save (MPS) is similarly found by dividing the change in saving by the change in income.

How to calculate margin? ›

To calculate profit margin, start with your gross profit, which is the difference between revenue and COGS. Then, find the percentage of the revenue that is the gross profit. To find this, divide your gross profit by revenue. Multiply the total by 100 and voila—you have your margin percentage.

How do you calculate MP example? ›

The marginal product of labor is calculated by dividing the change in output divided by the change in labor, given that all else is equal. For example, if output increased by 20 and labor increased by 2, MPL = 20 / 2 = 10.

Why is Mr equal to MC? ›

Maximum profit is the level of output where MC equals MR.

When the production level reaches a point that cost of producing an additional unit of output (MC) exceeds the revenue from the unit of output (MR), producing the additional unit of output reduces profit. Thus, the firm will not produce that unit.

What is MC and MR curve? ›

Marginal revenue curve and marginal cost curve

Therefore, a company is making money when MR is greater than marginal cost (MC). And when MC = MR, it is called profit maximization. After this point; the company can no longer make a profit. Therefore, it is in their interest to stop production.

What is the formula for MC in microeconomics? ›

Marginal Cost = (Change in Costs) / (Change in Quantity)

This produces a dollar amount for each additional unit of a product that is produced.

Is Econ macro or micro? ›

Economics is similar in that it considers the entire economy (macro), as well as the small, individual decisions that feed into that larger economy (micro).

Is this macro or micro? ›

Trick to Remember the Difference

macro. Simply put, micro refers to small things and macro refers to big things. Each of these terms appears in a wide variety of contexts and refers to a vast number of concepts, but if you remember this simple rule, you will generally be able to remember which is which.

Is Econ 201 a hard class? ›

The material is pretty dry most of the time, but easy to learn. Grading is also super fair, we had problem sets every week graded for completion and two midterms + a final. You get to make a double-sided formula sheet for both midterms and two double sided formula sheets for the final.

How do you know if something is micro or macro? ›

Microeconomics is the field of economics that looks at the economic behaviors of individuals, households, and companies. Macroeconomics takes a wider view and looks at the economies on a much larger scale—regional, national, continental, or even global.

Is Macro Econ harder than micro? ›

At the entry-level, microeconomics is more difficult than macroeconomics because it requires at least some minimal understanding of calculus-level mathematical concepts. By contrast, entry-level macroeconomics can be understood with little more than logic and algebra.

What type of class is Econ? ›

Part of the social sciences group, economics explores the full spectrum of issues that impact on financial situations and decisions.

What is microeconomics examples? ›

Consumer equilibrium, individual income and savings are examples of microeconomics.

What are 3 differences between microeconomics and macroeconomics? ›

Microeconomics primarily deals with individual income, output, price of goods, etc. Macroeconomics is the study of aggregates such as national output, income, as well as general price levels. 3. Microeconomics focuses on overcoming issues concerning the allocation of resources and price discrimination.

Who is father of economics? ›

Adam Smith was an 18th-century Scottish philosopher. He is considered the father of modern economics. Smith is most famous for his 1776 book, "The Wealth of Nations."

Is Econ worth taking? ›

If you're asking yourself: Is economics a good major, you can rest assured that it can very well be. In fact, a recent Forbes article named economics degrees as #10 in their list of best master's degrees. An economics major can offer a great deal of value and a solid base for a variety of professions.

How can I pass my Econ test? ›

The Best Way to Study for Economics Exams One to Three Weeks in Advance
  1. Ask your instructor for an exam outline and what to expect on the exam.
  2. Create an overview. Review your notes and any assignments you had.
  3. Review the course's main ideas.
  4. For each big idea, review its sub-topics and supporting details.
  5. Practice.
May 24, 2019

Is highschool ECON hard? ›

Even though economics is a social science, it can be as difficult and demanding as any of the more challenging academic subjects, including math, chemistry, etc. To do well in economics requires time, dedication, and good study habits.

What is micro and macro economics with examples? ›

Examples of microeconomics are individual demand, individual supply, the theory of the firm, opportunity cost, and consumer theory. Examples of macroeconomics include aggregate demand, aggregate supply, efficiency, investment, unemployment, and inflation.

What is considered a macro? ›

Well, “macro” is short for macronutrient. What's a macronutrient? They're the three categories of nutrients you eat the most and provide you with most of your energy: protein, carbohydrates and fats. So when you're counting your macros, you're counting the grams of proteins, carbs or fat that you're consuming.

What are the three main goals of macroeconomics? ›

In Concept 10: Economic and Social Goals, we discussed that nations have economic goals, like equity and efficiency. In macroeconomics three of these goals receive extra focus: economic growth, price stability and full employment.

Top Articles
Latest Posts
Article information

Author: Tyson Zemlak

Last Updated:

Views: 5831

Rating: 4.2 / 5 (63 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Tyson Zemlak

Birthday: 1992-03-17

Address: Apt. 662 96191 Quigley Dam, Kubview, MA 42013

Phone: +441678032891

Job: Community-Services Orchestrator

Hobby: Coffee roasting, Calligraphy, Metalworking, Fashion, Vehicle restoration, Shopping, Photography

Introduction: My name is Tyson Zemlak, I am a excited, light, sparkling, super, open, fair, magnificent person who loves writing and wants to share my knowledge and understanding with you.